Limited-time financing: 0% APR for 24 months on new HVAC system installs.Claim now
Boost Air And Plumbing logo — HVAC company in Arlington, TXBoost Air And Plumbing
AC repair in progress on a residential condenser by Boost Air And Plumbing

AC Repair

AC Refrigerant Recharge in Arlington & Grand Prairie, TX

If your vents are blowing lukewarm air, your system might be low on refrigerant. We provide precise R-410A and R-22 recharging to get your home cold again fast. We focus on finding leaks, not just masking the symptoms.

What neighbors say

What Our Customers Are Saying

Symptoms of Low Refrigerant in North Texas Systems

When the temperature hits triple digits in DFW, a small leak becomes a massive problem. You might notice your AC running for six hours straight without dropping the thermostat by a single degree. This often points to a lack of Freon or Puron in the system. It is a common cause of generic AC Not Cooling Repair calls during July and August.

Listen for a hissing or bubbling sound near the indoor air handler or the outdoor condenser unit. Ice forming on the copper lines is another dead giveaway that your pressures are off. If you see ice, turn the system off immediately. Running a frozen unit can slug the compressor and turn a simple recharge into an expensive replacement.

Boost Air technician diagnosing an AC condenser during a repair call

The Difference Between a Top-Off and a Real Fix

Adding gas to a leaky system is like putting air in a flat tire without patching the hole. We do not just 'juice it up' and leave you to call us again in three weeks. Our NATE-certified techs use electronic leak detectors to find where the R-410A is escaping. We frequently find leaks at the flare fittings or within the evaporator coil fins.

We work on every major brand including Trane, Goodman, and Lennox. If your system is older and still uses R-22, we will give you a straight answer on the costs. Sometimes a repair makes sense, but often the price of old refrigerant means an upgrade is the smarter financial move. We give you the facts so you can decide.

Boost Air technician working on a residential system

Precision Charging Using Subcooling and Superheat

Modern high-efficiency systems from brands like Carrier or Rheem require exact refrigerant weights. Being off by just five or six ounces can kill your SEER rating and spike your electric bill. We do not guess based on feel or sight glasses. Our team uses digital scales to track every ounce of gas entering your system.

We measure the outdoor ambient temperature and the indoor wet-bulb temperature. This allows us to calculate the exact subcooling or superheat the manufacturer requires. It is the only way to ensure the expansion valve operates correctly. Proper pressure prevents the compressor from overheating. Maintenance is about more than just cleaning.

Boost Air And Plumbing service van on a residential job in North Texas

EPA Certified Handling and Compliance

Handling refrigerant is a serious job that requires an EPA 608 certification. It is illegal and dangerous to vent these gases into the atmosphere. Our technicians carry the proper recovery equipment to safely remove and store old refrigerant when a repair is necessary. We follow every environmental regulation to the letter.

Our 10 years of experience in the Arlington and Grand Prairie area means we know how local conditions affect your equipment. High humidity and vibrating components can stress copper joints over time. We double-check every service valve and Schreader core to ensure your new charge stays inside the system where it belongs. Quick fixes do not last. Quality work does.

AC repair in progress on a residential condenser by Boost Air And Plumbing

What you get

  • Accurate digital manifold pressure readings for precise refrigerant levels.
  • Electronic leak detection to find the root system failure.
  • Recovery of old refrigerant following strict EPA 608 guidelines.
  • Evaluation of evaporator coil and condenser coil airflow efficiency.
  • Clearing the condensate drain line to prevent water damage.

How it works

  1. 1We connect digital manifolds to check the standing pressure of your system.
  2. 2A technician uses an electronic 'sniffer' to locate potential leaks in the coils.
  3. 3We calculate the exact subcooling or superheat required by the manufacturer's data plate.
  4. 4Refrigerant is added by weight using a digital scale for maximum cooling efficiency.

Related services

Why call us

  • • 10+ years in DFW
  • • TDLR / TSBPE licensed
  • • Flat-rate, written pricing
  • • Same-day weekday service
  • • Financing on qualifying jobs
Call (817) 839-4672

FAQs

Frequently asked questions

Need AC Refrigerant Recharge in Arlington or Grand Prairie Today?

Call Boost Air And Plumbing at (817) 839-4672 for an honest recharge diagnosis.

ServingArlington HVACandGrand Prairie HVACwith same-day dispatch.

Visit our shops

Two DFW locations serving the entire Metroplex

Boost Air And Plumbing dispatches trucks from our Arlington main office and our Grand Prairie shop, covering Tarrant and Dallas counties with same-day HVAC and plumbing service. Call (817) 839-4672 for either location.

Arlington (Main Office)

Boost Air And PlumbingArlington, TX

  • 2313 Michigan Ct
    Arlington, TX 76016
  • (817) 839-4672
  • Mon–Fri: 8:00 AM – 6:00 PM
    Saturday: 9:00 AM – 6:00 PM
    Sunday: Closed
Get directions

Grand Prairie

Boost Air And PlumbingGrand Prairie, TX

  • 2100 TX-360 Ste 907
    Grand Prairie, TX 75050
  • (817) 839-4672
  • Mon–Fri: 8:00 AM – 6:00 PM
    Saturday: 9:00 AM – 6:00 PM
    Sunday: Closed
Get directions