Limited-time financing: 0% APR for 24 months on new HVAC system installs.Claim now
Boost Air And Plumbing logo, HVAC and plumbing in Arlington, TXBoost Air And Plumbing
Furnace repair and inspection by Boost Air And Plumbing

Plumbing

Water Heater Repair in Arlington, TX

Tank and tankless, gas and electric. We find what failed, quote the repair, and replace the heater only when the tank or the heat exchanger is finished.

What neighbors say

What Our Customers Are Saying

What a water heater repair covers

Arlington houses use both storage tanks and tankless heaters, and both gas and electric. A repair visit is for a heater that still has a sound vessel and a failed part: no hot water, water that is only warm, a leak at a fitting, rusty water, rumbling or popping, or a pilot, igniter, or control that will not stay lit.

Gas tanks usually fail at the thermocouple, the igniter, the flame sensor, the gas control, or a clogged burner. Electric tanks usually fail at an element or a thermostat, or the breaker has tripped because an element shorted. Tankless units scale up on North Texas water and then shut down on a fault code, or they light and cannot keep up because the heat exchanger is coated. We test the part that matches the symptom.

Symptoms

  • No hot water, or water that runs warm and then cold.
  • A puddle, a drip at a fitting, or water in the drain pan.
  • Rusty or brown water from the hot side only.
  • Popping, rumbling, or banging when the burner or elements come on.
  • A pilot that will not stay lit, an igniter that clicks and never lights, or a tankless unit that shows a code and locks out.

Repair or replace, without a price list

Repair makes sense when the tank or heat exchanger is solid and one part failed. Age alone is not the decision. A ten-year-old tank with a bad element can be worth repairing. A six-year-old tank that is wet at the seam is not.

Replace when water is coming through the steel, when the tankless heat exchanger is cracked, or when the same heater has had several repairs and still cannot hold temperature. We do not publish a repair price here because the number depends on the unit and the part. You get the number at the house before we start. If replacement is the better path, the estimate is free. See water heater replacement, water heater installation, and tankless installation.

Safety before anyone opens a panel

The temperature and pressure valve (the T&P valve) is the heater's safety outlet. If it is dripping, stuck, or piped uphill, or if the discharge stops short of the floor, that is part of the repair. Do not cap the valve.

If you smell gas, leave the house and call the gas company from outside. Do not relight a pilot, flip a breaker, or hunt for the leak with a lighter. We repair the heater after the gas company clears the building.

What the visit includes

We ask gas or electric, tank or tankless, and what changed. On site we shut the water off if it is leaking, test the failed part, and check the T&P valve, the pan, and the vent or the electrical supply. You approve the repair price, then we do the work and test for hot water and leaks before we leave.

The service fee is $0 with an approved repair. Same-day service is available Monday through Friday. Hours are Monday through Saturday, 8am to 7pm. Financing is available as low as $99 a month on approved credit when the job qualifies. Call (817) 612-9107 or use the scheduler. The Arlington shop is at 2313 Michigan Ct. This service covers the cities listed in the site footer.

For a written walk-through of common problems, read common water heater problems in Arlington homes. The plumber hub lists the rest of the plumbing work.

Water heater repair

Questions from the visit

Can a leaking water heater be repaired?
Often, when the leak is a fitting, the drain valve, or the temperature and pressure valve. A leak from the tank wall means the tank is done and the heater should be replaced. We tell you which one it is after we look.
Why is there no hot water?
On an electric heater it is often a tripped breaker, a failed element, or a bad thermostat. On a gas heater it is often the igniter, the flame sensor, the thermocouple, or the gas control. A plumber tests those parts instead of guessing.
What should I do if I smell gas?
Leave the house. Do not use light switches or try to relight a pilot. Call the gas company from outside. After they say the leak is cleared, we can repair the heater.
Is the service fee waived?
The service fee is $0 when you approve the repair. If the heater needs to be replaced, the replacement estimate is free. Financing is available as low as $99 a month on approved credit. Same-day service is available Monday through Friday.

No hot water or a leaking heater?

Call (817) 612-9107. $0 service fee with an approved repair. Same-day service Monday through Friday. Free estimates on replacement.

Call (817) 612-9107

ServingArlington PlumberandGrand Prairie Plumberwith same-day dispatch.

Visit our shops

Two DFW locations serving the entire Metroplex

Boost Air And Plumbing dispatches trucks from our Arlington main office and our Grand Prairie shop, covering Tarrant and Dallas counties with same-day HVAC and plumbing service. Call (817) 612-9107 for either location.

Arlington (Main Office)

Boost Air And PlumbingArlington, TX

  • 2313 Michigan Ct
    Arlington, TX 76016
  • (817) 612-9107
  • Monday to Saturday: 8:00 AM to 7:00 PM
Get directions

Grand Prairie

Boost Air And PlumbingGrand Prairie, TX

  • 2100 TX-360 Ste 907
    Grand Prairie, TX 75050
  • (817) 612-9107
  • Monday to Saturday: 8:00 AM to 7:00 PM
Get directions