Arlington (Main Office)
Boost Air And PlumbingArlington, TX
- 2313 Michigan Ct
Arlington, TX 76016 - (817) 612-9107
- Monday to Saturday: 8:00 AM to 7:00 PM

Grand Prairie, TX
Grand Prairie cooling runs for most of the year. A replacement is the right next step when the system can no longer hold the house, not when one part fails on a hot afternoon. Boost Air And Plumbing replaces central air for Grand Prairie homes. Free replacement estimates. Financing as low as $99/mo.
A lot of Grand Prairie systems are split units: a condenser on a pad, a coil on the furnace in the attic or a hall closet, and flex duct that has been in that attic for years. The first question is whether the failure is a part or the system.
A capacitor, a contactor, or a condenser fan on a younger unit is usually a repair. Approved repairs include a $0 service fee, and same-day service is available Monday through Friday. A failed compressor, a coil that will not hold a charge, or a second refrigerant repair on the same leak is a different decision. Equipment around 15 years old makes replacement worth pricing next to the repair. That age is a prompt, not a rule.
We quote the repair when the system is still a reasonable candidate. If the numbers are close, the free replacement estimate sits beside it. You choose.
Two houses on the same street can need different equipment. These are the items that move a quote. None of them is a price list, and Boost Air does not publish a flat rate for a replacement.
System size. Tonnage comes from a load calculation for the rooms, the glass, and the insulation, then from what the ducts can actually move. Copying the number on the old condenser is how a lot of these houses were oversized the first time. An oversized system cools the thermostat and shuts off before it has pulled humidity out of the air. That shows up in a Grand Prairie July.
SEER2 efficiency. Current split systems are rated in SEER2, and Texas sets a regional minimum for new equipment. A higher rating costs more in the cabinet. It only performs that way if the ducts, the charge, and the airflow are right. The rating on the box is not the result in the hallway.
Ductwork. Many Grand Prairie air handlers sit in the attic, with long flex runs to the back bedrooms. Leaks, kinks, and a weak return change the job. Sealing a few joints is not the same project as replacing trunks. The quote should say which one the house needs, or that the ducts are adequate.
Refrigerant type. Systems installed over the last decade are mostly R-410A. New equipment uses a different refrigerant, often R-32 or R-454B, and the outdoor unit and indoor coil have to be a pair for it. Replacing only the condenser is sometimes reasonable when the coil is a true match and still sound. It is a poor default.
Electrical. Older Grand Prairie panels sometimes need a new breaker, a disconnect, or a whip before the new unit can be connected. A heat pump can ask more of the panel than the air conditioner it replaces. That work belongs on the quote when the house needs it.
Permit. A residential replacement in Grand Prairie is permitted through the City of Grand Prairie. The permit and the inspection are part of the job, not an add-on after the equipment is already running.
Grand Prairie sits in the same long DFW cooling season as the rest of the mid-cities: hot, humid afternoons, and equipment that may not rest from May into October. The housing stock is its own mix. Ranch houses from the 1970s and 1980s often have the air handler in a closet or a low attic. Newer subdivisions put the equipment and a long duct run in a hotter attic. Both show up on the same street in parts of town.
That is why a replacement written for a different city is a weak template here. The attic access, the coil location, the age of the furnace, and the panel all change the afternoon of the install. The free estimate is a look at this house.
Boost Air is a Lennox and American Standard dealer. The brand is one line on the quote. The load, the ducts, and the install decide whether the system is quiet in August of year six. We will tell you if the ducts have to be repaired before a higher-efficiency system can deliver the air it is rated for.
The visit starts with the equipment you have. We measure the load, look at the ducts, the line set, the drain, and the electrical, and say whether the furnace stays. The written quote comes before anything is ordered. Financing as low as $99/mo is available on qualifying replacements.
On install day the old refrigerant is recovered. The new outdoor unit and indoor coil go in as a matched pair, with a new filter drier, a pressure test, and a deep vacuum before the system is charged. The thermostat is set up for the equipment. The City of Grand Prairie permit is pulled, and the inspection is scheduled. Haul-away of the old cabinet is part of the job.
Startup checks temperature split and the condensate drain, especially when the coil is in the attic. A pan that barely kept up with the old system will overflow the first long run of a new one. That drain is checked before we leave, not after a ceiling stain.
Hours are Monday to Saturday, 8am to 7pm. Call (817) 612-9107 or book online. See HVAC service in Grand Prairie for the rest of the local work, and AC installation and replacement for the service across the cities we cover.

Send a few details and we will call or text you during business hours.
Questions
Free replacement estimates. Financing as low as $99/mo. Call (817) 612-9107 or schedule online. Open Monday to Saturday, 8:00 AM to 7:00 PM.
ServingArlington HVACandGrand Prairie HVACwith same-day dispatch.
Visit our shops
Boost Air And Plumbing dispatches trucks from our Arlington main office and our Grand Prairie shop, covering Tarrant and Dallas counties with same-day HVAC and plumbing service. Call (817) 612-9107 for either location.
Arlington (Main Office)
Grand Prairie