Limited-time financing: 0% APR for 24 months on new HVAC system installs.Claim now
Boost Air And Plumbing logo, HVAC and plumbing in Arlington, TXBoost Air And Plumbing
Completed furnace installation by Boost Air And Plumbing

Boost Air Blog

Furnace Maintenance Checklist Before Winter in Grapevine, TX

Furnace maintenance checklist before winter? Call (817) 612-9107 or Book Online

Part of our Furnace Tune-Up guide.

Quick answer

A Grapevine furnace maintenance checklist has two lists. At home, check the filter, vents and returns, the thermostat, the area around the furnace, carbon monoxide detector batteries, the condensate line on a high-efficiency unit, and any odd sounds. A technician checks the burner, flame sensor, igniter, heat exchanger, gas pressure, safety controls, electrical connections, and the blower. If you smell gas, leave and call the gas utility. If a carbon monoxide alarm sounds, get outside.

Grapevine furnaces sit through a long cooling season, then get switched to heat on the first cold front. A furnace maintenance checklist before that week is two different jobs. One is what you can do without opening the burner compartment. The other is what a technician checks once the cabinet is open. Mixing them is how a filter change turns into a gas valve problem.

Houses near Main Street, College Street, and Wall Street often have an older closet or a low attic and a metal flue. Houses between State Highway 26 and Grapevine Lake, and toward Colleyville, are more often two stories with the furnace in a hot attic. The checklist is the same. The cabinet you are standing next to is not.

Boost Air And Plumbing does not have a Grapevine office. Visits leave from Arlington at 2313 Michigan Ct and from Grand Prairie at 2100 TX-360 Ste 907. HVAC service in Grapevine is the city page. The tune-up itself is furnace tune-up.

If you smell gas (a rotten egg odor), stop the checklist. Do not flip switches, and do not start the furnace. Leave the house and call the gas utility from outside. If a carbon monoxide alarm sounds, get everyone outside and call 911. Carbon monoxide has no smell. Do not air the house out and go back in to finish the filter.

Homeowner checklist

These are the steps that stay outside the burner compartment. If a step needs a tool inside the furnace, it belongs on the technician's list.

  • Filter. Pull the filter and look through it. If you cannot see light, replace it with the size printed on the old one. A packed filter is a common reason a furnace overheats and shuts off. Write the date on the frame so you know when it went in.
  • Vents and returns. Open the supply registers. Move furniture, rugs, and storage off the return grilles. The furnace cannot heat a room whose register is closed, and it cannot breathe through a return that is blocked.
  • Thermostat. Set it to heat, with the fan on auto, and set the temperature a few degrees above the room. If the screen is blank, replace the thermostat batteries before you assume the furnace is dead. Give it a few minutes. A furnace does not have to roar the instant you touch the dial.
  • Clear area. Move boxes, paint, and anything that can burn away from the furnace. A closet furnace in an older Grapevine house is easy to bury behind stored holiday bins. Leave the blower door on. A loose door keeps many furnaces from running.
  • Carbon monoxide detector batteries. Press the test button. Replace the batteries. Replace an alarm that is past the date printed on the back. Put one near the sleeping rooms, not only next to the furnace. If the alarm sounds, get outside.
  • Condensate line, on a high-efficiency furnace. A furnace around 90 percent AFUE and higher makes water and drains it through a small line, often PVC. Look at the line you can see outside the cabinet. A kink, a disconnect, or water in the pan is a reason to book the tune-up before you need heat. Do not open the cabinet to snake the trap.
  • Odd sounds. Stand by a register and listen for one cycle. A light dusty smell on the first startup of the season can be dust on the heat exchanger. Banging, squealing, grinding, or a boom when the burners light is not dust. Shut the furnace off and book a visit. Do not take the panel off to find the noise.

That list does not measure gas pressure, and it does not inspect a heat exchanger. What a heating checkup covers in Arlington is the visit from the technician's side. The first time you turn the furnace on in Grand Prairie is the order of a first startup, if the furnace has been off since spring.

Professional tune-up checklist

The tune-up is the work inside the cabinet. The furnace tune-up is $29 through December 31, 2026. A part that has already failed is a separate price, quoted before it is installed. The service fee is $0 with an approved repair. The final price of any repair depends on the system.

A technician's list for a gas furnace includes:

  • Burner. The flame should be steady and blue. A yellow, lazy flame is a combustion problem, not a filter problem. The technician looks at it with the burners firing.
  • Flame sensor. A coated sensor is a common reason the burners light and then shut off after a summer of sitting. Cleaning it is part of the visit when the sensor is coated. It is not a sandpaper job on a live gas valve.
  • Igniter. Hot surface igniters crack while the furnace sits. The technician checks that the igniter glows and that the burners light in sequence. A cracked igniter is a repair, quoted on its own.
  • Heat exchanger inspection. The technician looks for cracks, rust, and soot. A crack means the furnace stays off. That is a replacement conversation, not a cleaning.
  • Gas pressure. The technician measures pressure at the valve and compares it with the rating plate. Homeowners do not set this. Wrong pressure means a flame that is too large, too small, or unstable.
  • Safety controls. Limit switches, the rollout switch, and the pressure switch that proves the draft motor is moving air. A switch that has been jumped out with a wire is not a repair. It gets put back so the furnace can shut itself off.
  • Electrical connections. Tight connections at the board, the igniter, and the blower. A loose spade that arced all summer is a no-heat call in November.
  • Blower. The wheel, the motor, and the filter rack. The blower ran all summer for the air conditioner, so dust on the wheel is common in an attic unit. Temperature rise is compared with the rating plate. Rise that is too high means too little air is moving.

An 80 percent furnace uses a metal flue. The technician checks that the flue is connected and that it is not rusted through. A condensing furnace adds the plastic intake and exhaust and the condensate trap to the same visit. Leaves or a nest in the outdoor terminations will shut that furnace down on the first cold morning.

How often that visit belongs on the calendar is how often to get a furnace tune-up in Grand Prairie. Once a year, in the fall, is the baseline. Sooner if last winter already failed.

What the checklist will not do

It will not resize a furnace that was too large on the day it was installed. It will not fix a return that is blocked inside a wall. It will not turn a cracked heat exchanger into a repair. If the checkup finds that the cabinet or the exchanger is done, ask for a free replacement estimate. Financing is available as low as $99/mo. The final price depends on the system.

Same-day service is available Monday through Friday, not on weekends. Hours are Monday through Saturday, 8am to 7pm. Book the tune-up before the first night you need heat, while the furnace still starts.

Book the checklist, then the tune-up

Do the homeowner list on a mild day. Then book the tune-up so the burner, the heat exchanger, and the gas pressure get looked at by a technician.

Boost Air And Plumbing checks furnaces in Grapevine from the Arlington and Grand Prairie shops. See furnace tune-up and HVAC service in Grapevine. Call (817) 612-9107 or book online. Hours are Monday through Saturday, 8am to 7pm.

Frequently asked questions

What belongs on a homeowner furnace maintenance checklist? The filter, open supply vents and returns, the thermostat, a clear area around the furnace, carbon monoxide detector batteries, the visible condensate line on a high-efficiency furnace, and a listen for odd sounds. Leave the burner compartment closed.

What does a professional furnace tune-up check? The burner, flame sensor, igniter, heat exchanger, gas pressure, safety controls, electrical connections, and the blower. That visit is not the same as replacing a failed part. Any repair is quoted before it is installed.

What should I do if I smell gas or a carbon monoxide alarm sounds? If you smell gas, leave the house and call the gas utility from outside. Do not flip switches or start the furnace. If a carbon monoxide alarm sounds, get outside and call 911. Carbon monoxide has no smell.

Is the $29 furnace tune-up a repair? No. The furnace tune-up is $29 through December 31, 2026. A failed part found during the visit is a separate price. The service fee is $0 with an approved repair. The final price of any repair depends on the system.

Does Grapevine have a Boost Air shop? No. There is no Grapevine office. Trucks come from Arlington at 2313 Michigan Ct and from Grand Prairie at 2100 TX-360 Ste 907. Hours are Monday through Saturday, 8am to 7pm. Call (817) 612-9107 or book online.

Need a hand from a licensed tech?

Call (817) 612-9107 or book online. We serve Arlington, Grand Prairie, and the surrounding North Texas communities.

Visit our shops

Two DFW locations serving the entire Metroplex

Boost Air And Plumbing dispatches trucks from our Arlington main office and our Grand Prairie shop, covering Tarrant and Dallas counties with same-day HVAC and plumbing service. Call (817) 612-9107 for either location.

Arlington (Main Office)

Boost Air And PlumbingArlington, TX

  • 2313 Michigan Ct
    Arlington, TX 76016
  • (817) 612-9107
  • Monday to Saturday: 8:00 AM to 7:00 PM
Get directions

Grand Prairie

Boost Air And PlumbingGrand Prairie, TX

  • 2100 TX-360 Ste 907
    Grand Prairie, TX 75050
  • (817) 612-9107
  • Monday to Saturday: 8:00 AM to 7:00 PM
Get directions