Arlington (Main Office)
Boost Air And PlumbingArlington, TX
- 2313 Michigan Ct
Arlington, TX 76016 - (817) 612-9107
- Monday to Saturday: 8:00 AM to 7:00 PM

Boost Air Blog
Should I replace my furnace before it dies? Call (817) 612-9107 or Book Online
Part of our Furnace Installation and Replacement guide.
Quick answer
Replace an Arlington furnace before it dies when the heat exchanger is cracked, repairs are stacking up, or a cold night would leave you picking equipment with the house already cold. A planned replacement is a free estimate while the old furnace still heats. How long the next one lasts depends on the install, not the brand. If you smell gas, leave and call the gas utility from outside.
Arlington homeowners ask whether they should replace a furnace before it dies in the fall, while the burners still light. The furnace has been a blower for the air conditioner since spring. It may be 15 years old, or it may have needed a part last winter and another the winter before. The house is still warm. The question is whether to schedule the replacement now or wait until the furnace stops on a night you actually need it.
This is a different question from a furnace that has already failed. If something is broken today, the repair-or-replace choice is in should I repair or replace my furnace in Garland. The notes below are for a furnace that still runs.
If you smell gas (a rotten egg odor), stop here. Do not flip switches or use a phone inside. Leave the home and call the gas utility from outside. If a carbon monoxide alarm sounds, or anyone has a headache, nausea, or dizziness that eases outdoors, get everyone outside and call 911. Carbon monoxide has no smell. Leave the furnace off until it is checked.
There is no sticker that expires an Arlington furnace on a birthday. The U.S. Department of Energy's Energy Saver guide says to consider replacement when a furnace is more than 15 years old. A Building America guide talks about a 15 to 20 year life when the furnace was installed and kept in working order. An older Department of Energy fact sheet put an average gas furnace lifetime around 18 to 20 years. Furnaces also keep heating past 20 years when the install and the airflow were right.
Heating season here is short. The burners may sit from March until a cold front. The blower does not sit. It moves cooled air through a long summer, then gets asked to heat on the first cold night. A poor install, a starved return, and short cycling use those hours up faster than the badge on the cabinet.
Age starts the question. The heat exchanger, the vent, and the repair history finish it. The longer version of those ranges is at what age a furnace should be replaced in Mansfield.
One failed igniter or a coated flame sensor is a repair. Those parts sit idle for months in North Texas, and they fail on furnaces that are otherwise sound. A furnace that heats evenly, with a sound heat exchanger and a flue that drafts, can be repaired at 12 years and again at 16.
The pattern that points toward replacement is frequency. A second major part in a short span, a control board after a blower motor, or a quote that keeps climbing while the house still has cold rooms is the cost trend that matters. A Department of Energy contractor guide treats a repair that costs more than about half of a replacement, on an older furnace, as a reason to price the replacement before you approve the part. Use that as a comparison, not a rule. A six-year-old furnace with a failed igniter is still a repair.
Industry ranges for the replacement side of that comparison are in furnace replacement cost in Arlington. They are industry ranges, not a price for your house. The final price depends on the system, the vent, and the house.
A higher AFUE furnace uses less gas to deliver the same heat. The current federal minimum for a non-weatherized gas furnace is 80 percent AFUE. An 80 percent furnace uses a metal flue. A furnace at about 90 percent AFUE or higher is a condensing unit. It needs plastic intake and exhaust pipes and a condensate drain.
In an Arlington attic or a tight closet, that pipe run and the drain can cost more than the difference in the equipment. A high-efficiency furnace with a bad drain or a sloppy vent is not a bargain. Efficiency on a brochure also does not fix a furnace that was sized too large and short cycles every evening. Furnace installation and replacement should say which flue the quote is using before you approve it.
A cracked heat exchanger is not a repair you keep running. Exhaust that should stay in the flue can mix with the air the blower sends through the house. Soot, a yellow flame, rusted flue pipe, or a carbon monoxide alarm are reasons to leave the furnace off. Age does not have to be 20 years for a crack to show up. A younger furnace with a crack is still a replacement conversation.
Do not open the burner compartment to look for the crack yourself. If a carbon monoxide alarm sounds, get outside and call 911. If you smell gas, leave and call the gas utility from outside.
Arlington winters are short, and the cold that matters often arrives as a front, not as a long season. A furnace that dies on that night is an emergency replacement: the house is already cold, and you are comparing equipment while you want heat back.
That visit is harder to plan. You have less time to read two written estimates. The vent path, the coil sitting on the furnace, and a return that was too small all get decided in a hurry. Same-day service is available Monday through Friday, not on weekends. Hours are Monday through Saturday, 8am to 7pm. A furnace that quits on Saturday evening or on Sunday is not a same-day visit. It waits until the shop is open. Waiting for the failure does not create a night crew. It creates a cold house and a shorter list of options.
A planned replacement avoids that clock. The old furnace still heats. You pick a date during open hours. The house stays warm until the install day.
A planned job starts while the furnace still runs.
HVAC service in Arlington is the local page if you want the shop, the hours, and the service list in one place. The shop is at 2313 Michigan Ct.
Two furnaces with the same badge do not get the same life. The one that was sized to the house, given a return that can feed it, and vented so the flue drafts will outlast a premium cabinet that short cycles on a clogged filter and a tired metal flue.
Ask how the BTU size was chosen, whether the return is large enough, and what the startup checks are. Temperature rise and a combustion check are part of commissioning. The logo on the door is not. A fall tune-up can clean a sensor. It cannot resize a furnace that was too large on the day it was installed.
Talk with a North Texas comfort advisor about a replacement while the furnace still heats. Free estimates. Financing is available as low as $99/mo. The final price depends on the system.
Boost Air And Plumbing installs gas and electric furnaces in Arlington and nearby cities. We do not install boilers. See furnace installation and replacement and HVAC service in Arlington. Call (817) 612-9107 or book online. Hours are Monday through Saturday, 8am to 7pm.
Should I replace my furnace before it dies? Replace it while it still heats when the heat exchanger is cracked, repairs are stacking up, or you do not want to choose a furnace on a cold night. A single igniter or flame sensor on a furnace that still heats evenly can stay a repair. Age starts the question. It does not finish it.
What is the risk of waiting until a cold snap in Arlington? If the furnace dies on a cold night, the house is already cold and you have less time to compare written estimates. Same-day service is Monday through Friday, not weekends. Hours are Monday through Saturday, 8am to 7pm. A failure on Saturday evening or Sunday waits until the shop is open.
Does a cracked heat exchanger mean the furnace should be replaced? Yes. A cracked heat exchanger is a safety problem, not a part to patch and keep running. Leave the furnace off. Carbon monoxide has no smell. If a carbon monoxide alarm sounds, get outside and call 911.
Does the brand decide how long the next furnace lasts? No. Sizing, airflow, venting, and how the furnace is commissioned decide more than the name on the cabinet. A furnace that short cycles on a starved return will wear out sooner than a plain furnace that was sized to the house and given a flue that drafts.
What does a planned furnace replacement look like? Someone looks at the furnace while it still runs, then writes an estimate that covers size, the vent, the drain on a high-efficiency model, the coil, and the permit. Estimates are free on any replacement. Financing is available as low as $99/mo. The final price depends on the system.
Call (817) 612-9107 or book online. We serve Arlington, Grand Prairie, and the surrounding North Texas communities.
Visit our shops
Boost Air And Plumbing dispatches trucks from our Arlington main office and our Grand Prairie shop, covering Tarrant and Dallas counties with same-day HVAC and plumbing service. Call (817) 612-9107 for either location.
Arlington (Main Office)
Grand Prairie